Xerox Phaser 3010 Service Manual page 84

Error Troubleshooting
2-30
Test Control Panel
Regi FB Lead -2.0 mm ~ 2.0 mm,
in 0.1 mm Step
Regi FB Side -1.0 mm ~ 1.0 mm,
in 0.1 mm Steps
Auto Registration
IIT I/O Check FB Home Sensor
■
ADF Scan Sensor
■
ADF Document
■
Sensor
ADF Cover Sensor
■
Scan Counter
Clear
Parameter
Pulse Dialing Enable Pulse Dialing
NOTE You can not select
Pulse dialing at the Fax
Setting Menu, only
Tone dial.
Pulse dial make/break
ratio
Enable 20 PPS DP
NOTE You can not select
Pulse 20PPS dialing at
the Fax Setting Menu.
DTMF Tone DTMF high tone
level (-dB)
DTMF high/low level
difference (dB)
DTMF Dialing
Speed (ms)
Xerox Internal Use Only
Description
Adjusts Registration of the flatbed
leading edge.
Adjusting Registration of the flatbed
side edge.
Reports the result of auto registration
which is performed while the printer
powers up.
Tests the scanner sensors.
This function clears the flat bed and
ADF counters.
Value Options
0:Disable
1:Enable
0: 30% / 70%, 1: 32% / 68%,
2: 33% / 67%, 3: 36% / 64%,
4: 38% / 62%, 5: 39% / 61%,
6: 40% / 60%, 7: 42%/ 58%
0:Disable, 1:Enable
0: -3 dB, 1: -4 dB, 2: -5 dB, 3: -6 dB,
4: -7 dB, 5: -8 dB, 6: -9 dB, 7: -10 dB
0: 0 dB, 1: -1 dB, 2: -2 dB, 3: -3 dB,
4:- 4 dB, 5: -5 dB
0: 70 ms, 1: 80 ms, 2: 85 ms,
3: 90 ms, 4: 95 ms, 5: 100 ms,
6: 105 ms, 7: 110 ms
Phaser 3010/3040/WorkCentre 3045 Service