Env Sensor Error - Xerox Phaser 6000 Service Manual

ENV Sensor Error

Phaser 6000/6010 and WC 6015 MFP
An error occurred while reading the Humidity Sensor.
Applicable Error
• 092-661: Env Sensor Error
Initial Actions
• Cycle printer power.
• If the problem persists, use the following procedure
Troubleshooting Reference Table
Applicable Parts
MCU Board, PL7.2.2
Troubleshooting Procedure Table
Step Actions and Questions
1 Replace the MCU Board
(page 8-121).
Does the error persist when the
power is turned off and on?
Xerox Internal Use Only
Error Messages and Codes
Wiring and Plug/Jack Map References
"Map 3 - Phaser 6000/6010" on
page 10-9
"Phaser 6000/6010 Fuser" on
page 10-17
"Map 3 - WorkCentre 6015 MFP" on
page 10-23
"WorkCentre 6015 MFP Fuser" on
page 10-31
Yes
Contact your
designated
field support for
assistance.
No
Complete.
3-97