WorkCentre 3045 Motor Test Procedures
Phaser 3010/3040/WorkCentre 3045 Service
These tests check whether the Digital Output (DO) components (motors, clutch,
and solenoids) operate. When the interlock is opened during a Motor Test the
component stops.
When a paper jam or PQ problem occurs, or an error message or code is displayed,
these tests help to pinpoint the faulty part. Before executing the test, examine the
details of the jam, print quality problem, or error, and isolate the faulty parts.
These tests are available:
•
Main Motor (Full, Slow)
•
Feed Solenoid
•
Toner Motor
Feed Solenoid
Code
DO-1
DO-2
DO-6
DO-9
Xerox Internal Use Only
Main Motor
Component
Main Motor (Full Rotation)
Main Motor (Slow Rotation)
Feed Solenoid
Toner Motor
Error Troubleshooting
Toner Motor
s3040-160
2-45