Image Quality
Vertical Blank Lines
Initial Actions
3-16
There are faded or completely non-printed lines along the page in the direction of
the paper travel from the leading edge to the trailing edge.
Warning
Allow the Fuser to cool before servicing the printer.
•
Ensure there is no debris on the media path.
Troubleshooting Reference Table
Applicable Parts
Transfer Roller, PL1.1.11
■
Fuser, PL5.1.1
■
Troubleshooting Procedure Table
Step
Actions and Questions
1
Check media condition.
Is the media dry and approved for
use?
2
Does the image print correctly?
3
Replace the Transfer Roller
(page 4-10).
Does the image print correctly?
4
Replace the Fuser (page 4-38).
Xerox Internal Use Only
Example Print
Vertical Blank Lines
Yes
Go to Step 3.
Complete.
Complete.
Complete.
Phaser 3010/3040/WorkCentre 3045 Service
No
Replace with
dry, approved
media, then go
to Step 3.
Go to Step 3.
Go to Step 4.
Contact your
designated
field support for
assistance.