Xerox Phaser 3010 Service Manual page 180

Image Quality
3-6
Vertical Blank Lines
Clean the inside of the printer.
Ghosting
a. Verify that the correct print media is
being used.
b. The print media surface may be uneven.
Try changing the Paper Type setting in
the printer driver. For example, change
the plain paper to thick.
c. Adjust the transfer bias (see page 6-5).
d. Adjust the Fuser temperature (see
page 6-5).
Background Contamination
There is toner contamination on all or most of
the page.
Test the Toner Motor.
Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 Service
Vertical Blank Lines
Residual Image/Ghosting
Background Contamination