Xerox Phaser 3010 Service Manual page 98

Error Troubleshooting
Rear Door Interlock
2-44
1. Enter Service Diagnostics (page 2-24).
2. Use the Up and Down Arrow buttons to select Printer > IOT Diag > Digital
Input > DI-7.
3. Open and close the Rear Door to actuate the switch.
4. Confirm the number shown on the display increases every time the actuator is
operated.
5. Press the Stop button to stop the test.
6. Close the Rear Door.
Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 Service
s3040-159