To Change A Master, Manager Or Operator Code; Adding An Rf Key To An Existing User; To Delete A Master, Manager Or Operator Code; To Exit The User Edit Mode - ADEMCO VISTA-120 Installation And Setup Manual

To CHANGE a
Master, Manager
or Operator Code
Adding An RF Key
To An Existing
User
To Delete a Master,
Manager or
Operator Code
To EXIT The User
Edit Mode
;
Enter Installer code* + [8] + User number (002-150) + new user's code.
* Or Master or Manager code, but must be code with higher level of authority than
the code being changed. (i.e. Master code can change a Manager or Operator level
code, but cannot change another Master code; a Manager code can change an
Operator level code, but cannot change a Master or another Manager code).
User Number = 003
NEW USER?
To add an RF key to an existing user, or to change a user's global arm option, first
delete that user's code, then re-add the user code as described in the "Add A User"
paragraph.
Enter your code* + [8] + User number (002-150) + your code again
* Installer, Master or Manager code, but must be code with higher level of authority
than the code being deleted. (i.e. Master code can delete a Manager or Operator
code, but cannot delete another Master code; a Manager code can delete an Operator
level code, but cannot delete a Master or another Manager code).
OK TO DELETE 003?
0=NO 1=YES
A user code can only be deleted from the partition through which it was entered. If
trying to delete from another partition, the message "User [XXX] Not Deleted" will be
displayed.
Press either [ ] or [#], or don't press any key for 10 seconds.
-
The system detects that the user number is already
assigned and will prompt if this is a new user. Press 0
(NO). The system will then confirm that the change is
allowed based on authorization level.
The system will prompt to confirm that you want to delete
this user. Press 0 (NO) or 1 (YES).
If yes, that user's code will be removed from all partitions to
which it had been assigned, and all authorization levels and
other information about that user will be deleted. Note that
a user can only be deleted by a user with a higher authority
level. A user cannot delete himself.
- 149 -