Holiday Definitions & Schedule Worksheet; Programming Holiday Schedules - ADEMCO VISTA-120 Installation And Setup Manual

Holiday Definitions & Schedule Worksheet

Programming Holiday Schedules

Hol.
Month/Day 1
1 /
2 /
3 /
4 /
5 /
6 /
7 /
8 /
9 /
10 /
11 /
12 /
13 /
14 /
15 /
16 /
Up to 16 holidays can be defined for the system. After entering Scheduling
Menu Mode, press 0 until the Holidays ? prompt appears.
Holidays ?
1 Yes 0 = No 0
HOLIDAY NUMBER ?
01-16, 00=Quit 01
01 ENTER DATE
00/00
Part ? 12345678
Key 0-8 x x
When all holidays have been programmed, enter 00 at the HOLIDAY
NUMBER prompt to quit the holiday menus.
Partition
2 3 4
Enter 1 to programme holiday schedules.
Enter the 2-digit holiday number to be programmed
and press * to accept entry.
Enter 00 then * at the Holiday Number prompt to quit
the Holiday menus and display the Quit ? prompt.
Enter 0 at the Quit ? prompt to
return to the main menu choices
and continue programming.
Enter 1 to quit Scheduling Menu
Mode.
The cursor will be positioned on the tens of months
digit. Enter the appropriate month, then press * to
proceed to the day field. Enter the appropriate day for
the holiday and press * to accept the entry.
Holidays can be set for any partition as follows. Press
0 to turn all partitions on or off, or else use keys 1-8 to
toggle the letter x under the partition to which this
holiday will apply. Press the * key when all desired
partitions have been assigned.
The Holiday Number prompt will be displayed again.
Repeat the procedure for each holiday to be
programmed.
5 6 7
Quit ?
1 = YES 0 = NO 0
– 119 –
8