ADEMCO VISTA-120 Installation And Setup Manual page 156

– 148 –
Open/Close Rep.?
0 = NO , 1 = YES
Access Group?
Enter 0-8
RF Button ?
0=NO , 1=YES
Enter Button ZN #
(001-128)
Multi-Access ?
0 = NO , 1 = YES
Global Arm ?
0 = NO , 1 = YES
Part. 2 – SHOP ?
0 = NO , 1 = YES
Part. 1 A0 WHSE
User 003 Auth=3G.
for this user.
Press 0 (NO) or 1 (YES), depending on whether or not
arming/disarming by this user will trigger opening &
closing reports. This prompt appears only if the installer
code is used to add a user.
If access schedules have been programmed, this prompt
appears. Enter the user's access group number (1-8) if
this user should have limited access to the system. Enter
0 if no access group should be assigned.
If a 5800 series button transmitter has been enabled for
arming/disarming functions, and is not assigned to a
user, this prompt will appear. Press 0 (NO) or 1 (YES).
If yes was given as the answer to the RF button
question, the zone number for the button will be
requested. Enter any one of the zone numbers assigned
to the button transmitter as AWAY, STAY or DISARM.
The system will then assign all buttons of the
transmitter to this user number.
Press 0 (NO) if the user is to have access to this
partition only. Press 1 (YES) if the user is to have
access to more than one partition.
programme exits this mode. If yes, the Keypad prompts
for the Global Arm option for this user.
Press 0 (NO) or 1 (YES), depending on whether or not
this user will be allowed to arm more than one partition
via Global Arm prompts (described in the KEYPAD
FUNCTIONS section). The keypad now prompts for the
user's access to the next partition.
Press 0 (NO) or 1 (YES), depending on whether or not
this user will have access to the displayed partition
number. If NO, the keypad displays this prompt for the
next partition number in sequence.
If YES, the keypad prompts for the following:
• User's authority level in the displayed partition (see
Authority Level prompt above).
• Open/Close option for this user in the displayed
partition (see Open/Close prompt above).
• Global Arm option for this user in the displayed
partition.
When all partitions have been displayed, the keypad
will scroll through all partitions to which access has
been assigned, and will display the user number,
authority level, open/close and global arm options that
were programmed for each partition the user was
granted access. For example:
Note that the "G" following the authority level indicates
that the global arm feature is enabled for this user in
the displayed partition, and that the period at the end
of the second line indicates open/close reporting is
enabled for this user in the displayed partition. The " "
indicates the partition from which the user may be
changed or deleted.
If NO, the