ADEMCO VISTA-120 Installation And Setup Manual page 96

DEVICE PROG?
0=no
RELAY PROG?
0=no
RLY VOICE DESCR?
0=no
CUSTOM INDEX ?
0=no
CLEAR RF SERIAL#?
0=no
Press 0 (NO) or 1 (YES) in response to the displayed menu selection. Pressing 0 will display
the next choice in sequence.
The following is a list of commands used while in the menu mode.
– 88 –
For
1=yes
addressable
(4281/5881/5882EU), 4204 output relay modules, and 4285
VIP Module and VGM
• Device Address
• Device Type
• Keypad Options (incl. partition assignment)
• RF House ID
For defining output relay functions.
1=yes
For entering voice descriptors for relays/Power Line Carrier
1=yes
devices to be used with the 4285 VIP Module
For creating custom word substitutes for Telephone Module
1=yes annunciation.
For deleting all RF serial numbers presently enrolled in the
1=yes
system.
#93 Menu Mode Key Commands
#93 Enters Menu mode
[ ] Serves as ENTER key. Press to have keypad accept entry.
[#] Backs up to previous screen.
0 Press to answer NO
1 Press to answer YES
00 Escapes from menu mode, back into data field programming
mode, if entered at the first prompt of each main menu option.
defining the following
devices, including
device characteristics
keypads, RF receivers
for