Limitation Of Access By Time Worksheet; Access Control Schedules - ADEMCO VISTA-120 Installation And Setup Manual

Limitation of Access by Time Worksheet

Holiday Note: Holidays used
for access groups are those
defined for partition 1 only.

Access Control Schedules

– 124 –
Limitation of Access is a means by which a user's access code is limited to working
during a certain period of time.. The system provides 8 Access Schedules, each of
which consists of two time windows for each day of the week and two time windows
for holidays (typically one for an opening time window and the second for a closing
time window). If an Access Schedule has been programmed, a user required to follow
that schedule would be assigned to an Access Group of the same number (1-8) when
that user is added to the system. If no limitations apply, enter 0.
Enter the appropriate time window numbers for each access group.
Acc Monday Tuesday
Sch W1 W2 W1
1
2
3
4
5
6
7
8
Enter Scheduling Menu Mode [Installer Code] + # 80. After entering Scheduling
Menu Mode, press 0 until the Access Sched. ? prompt appears.
Access Sched. ?
1 Yes 0 = No 0
ACCESS SCHED # ?
01-08, 00 = Quit 01
Enter 0 at the Quit ? prompt to return to the main menu choices
and continue programming. Enter 1 to quit Scheduling Menu
Mode.
MON A1 Window 1?
00:00 00:00 00
MON A1 Window 2 ?
00:00 00:00 00
TUE A1 Window 1?
00:00 00:00 00
Hol A1 Window 1 ?
00:00 00:00 00
Hol A1 Window 2 ?
00:00 00:00 00
Wed. Thursday
W2 W1 W2 W1 W2
Enter 1 to programme access schedules.
Enter the access control schedule number between 01 and 08.
Press * to accept entry.
Enter 00 at the Access Sched # prompt to quit the Access
control menus and display the Quit ? prompt.
Enter the first time window number from 01-20 for which this
access schedule applies for the displayed day. The actual time
that has been stored for the window will be displayed. Press * to
continue.
Enter the second time window number from 01-20 for which this
access schedule applies for the displayed day. The actual time
that has been stored for the window will be displayed. Press * to
continue.
Repeat the procedure for the other days of the week. When the
last day of the week has been programmed, the holiday
opening/closing windows may be entered.
Enter the first time window number for holidays for which this
access schedule applies. As the number is keyed in, the actual
time that has been stored for the window will be displayed.
Press * to continue.
Enter the second time window number for holidays for which
this access schedule applies. As the number is keyed in, the
actual time that has been stored for the window will be
displayed. Press * to continue.
When all access control schedules have been programmed,
enter 00 at the Access Sched # prompt to quit this set of menus.
Friday Saturday Sunday
W1 W2 W1 W2 W1
Quit ?
1 = YES 0 = NO 0
Holiday
W2 W1 W2