Secondary Phone Number; Download Phone No - ADEMCO VISTA-120 Installation And Setup Manual

SECONDARY PHONE NUMBER

*34
Enter the secondary phone number, up to 17 digits, 0-9; enter #11 for *,
#12 for #, and #13 for a 2 sec. pause.
It is used if communication on the primary number is unsuccessful, or if
split/dual reporting is desired. Do not fill unused spaces. If this field is
programmed, a secondary subscriber account number (field *90) must
also be programmed (can be the same as the primary account number).

DOWNLOAD PHONE NO.

*35
Enter the downloading phone number, up to 17 digits, 0-9; enter #11 for
*, #12 for #, and #13 for a 2 sec. pause. Do not fill unused spaces.
This field is applicable only if downloading will be utilized.
DOWNLOAD ID NO
*36
Enter eight digits, 00-09; A-F (10-15).
Only applicable if downloading will be utilized. Make entries as 2-digit
numbers as follows:
00=0 02=2
01=1 03=3
DOWNLOAD COMMAND ENABLES
*37
Dialler System
Shutdwn Access †
Shutdwn
1 = enable a function
0 = disable a function
Each of the various remote functions can either be enabled or disabled
through V-Link downloading software. Disabling a function means that
you will not be able to perform that function with respect to this system.
See field 1*53 to disable the download callback option.
PREVENT ZONE XXX BYPASS (partition-specific)
*38
001-128 = zone number that cannot be bypassed by the user
000 = all zones can be bypassed
This selection does not affect fire zones, which the system prevents from
being bypassed.
OPEN/CLOSE REPORT FOR INSTALLER CODE
*39
(partition-specific)
1 = open/close reporting for the installer is desired
0 = no open/close reporting for the installer
OPEN/CLOSE REPORTING FOR KEYSWITCH
*40
1 = enable open/close reporting for the keyswitch
0 = keyswitch open/close reporting is not desired
NORMALLY CLOSED OR EOLR (ZONES 2-8)
*41
1 = end-of-line resistors are not used, in which case only normally
closed devices must be used.
0 = end-of-line resistors used
SUPPRESS FIRE ALARM RELAY
*42
1 = suppress fire alarm relay activation on 4204/Powerline Carrier
Device relays
0 = 4204/Powerline Carrier Device fire alarm relay activities on fire
alarms
|
04=4 06=6 08=8
05=5 07=7 09=9
Restrict Remote Remote Remote
Bypass Disarm
†
Restrict Download Access When Armed: Can
only arm unarmed partitions, upload the programme/
event log, command relays, and request status
| | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | |
| | | | |
10=A 12=C 14=E
11=B 13=D 15=F
Upload Download
Arm Programme Programme
| |
[000] | |
[1]
[0]
[0]
[0]
– 75 –