Loading Communication Defaults; Communication Defaults - ADEMCO VISTA-120 Installation And Setup Manual

Loading Communication Defaults

To help expedite the installation, the system provides 4 different
communication defaults (Low Speed, Ademco Express, Ademco High Speed &
Ademco's Contact ID). These defaults automatically programme industry-
standard code assignments for zones, keypad panics, non-alarm and
supervisory conditions, and can be loaded at any time without affecting non-
communication programme fields.
You may load communications defaults at any time.
recommended that the panel be defaulted first (*97) only if no other
programming has been done. If other programming has already been
done, there is no need to default the panel.
To load communication defaults, do the following:
Enter programme mode [Installer Code] + 8 0 0. Once the Programming
mode is entered, first press *94 and then enter one of the following field
numbers:
TABLE OF DEFAULT PROGRAMMING COMMANDS
PRESS TO LOAD THIS DEFAULT PROGRAMME SET
*80 Low Speed communication defaults
*81 Ademco 4 + 2 Express communication defaults
*82 Ademco High Speed communication defaults
*83 Contact ID communication defaults
However, it is
– 131 –