Time Driven Event Worksheet - ADEMCO VISTA-120 Installation And Setup Manual

Time Driven Events Worksheet
Action Code
30 Auto bypass - Zone list
31 Auto unbypass - Zone list
Open/Close Windows
Activation time 3 (During) is the only valid choice for these commands.
Action Code
40 Enable Opening Window by partition
41 Enable Closing Window by partition
42 Enable Access Window for Access group
3) Enter the desired Activation time, which refers to when the action is
to take place relative to the time window. Select from:
Activation
Time Description
1 Beginning of time window
2 End of time window
3 During time window active period only (On at beginning of
window, off at end). This can be used in conjunction with the
arm, disarm or bypass commands to control a part of the system
during the window. For example, if bypass is selected to activate
during the window, the zones in the zone list will be bypassed at
the beginning of the window and unbypassed at the end of the
window.
4 Beginning and end of time window (ex. -Coffee break buzzer). In
this example, if relay pulse was selected, the relay would pulse
for 2 seconds at the beginning of the window, signaling the
beginning of the coffee break. At the end of the window it would
pulse again, signaling the end of coffee break.
Sched. Time
Num. Window M T W T F S S H
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Day(s) Action
Desired
Action Specifier
Zone list #
Zone list #
Action Specifier
Partition(s)
Partition(s)
Access Group
Action Activation
Specifier Time
– 121 –