ADEMCO VISTA-120 Installation And Setup Manual page 131

30=Auto bypass - Zone list
31=Auto unbypass - Zone list
42=Enable Access Window for
Access group(s)
01 Time Window ?
00:00 00:00 01
01 Active time ?
0
Days ? MTWTFSSH
Key 0-8 x x
When all timed events have been programmed, enter 00 at the TIMED EVENT
prompt to quit this set of menus.
Actions 30-31
Enter the zone list number which
contains the zones to be bypassed or
unbypassed. Press
entry. The Time Window ? prompt
appears.
Action 42
Enter the group number to which the
time window will apply. Press
accept entry. The Time Window ?
prompt appears.
Enter the time window number (01-20) for which this timed
event is to occur. As the number is keyed in, the actual time
that has been stored for the window will be displayed. Press
the to continue.
Enter the activation code number from 1-4 (listed below). As
the number is keyed in, the activation time will be
displayed. The choices are:
1: Trigger at the start of the window
2: Trigger at the end of the window
3: Take effect only for the duration of the window
4: Trigger at both the start and the end of the
window. Example - coffee break buzzer.
Press the key when the desired choice is showing.
The system will then ask for which days the event is to
be activated. Press 0 to toggle all days on or off or else
press keys 1-8 to toggle the letter x under the day on or
off (Monday = 1, Holiday = H = 8 ).
When all entries have been made, the TIMED EVENT #
prompt is displayed again. Repeat the procedure for each
timed event required by the installation.
01 ZONE LIST ?
ENTER 1-8
to accept
GROUP ? 12345678
Key 0-8
to
1
X
– 123 –