ADEMCO VISTA-120 Installation And Setup Manual page 37

Compatible Polling Loop Devices
998MX Dual PIR
4297 Extender Module
5192SD Photoelectric
Smoke Detector
5192SDT Photoelectric
Smoke Detector
w/Heat Detector
4101SN Serial Number
Single Output Relay
Module
4191SN Serial Number
Recessed
Reed Contact
4193SN 2-Zone Monitor
Module
4293SN 1-Zone Monitor
Module
4939SN Surface Mount
Magnetic Reed
Contact
4959SN Aluminium
Overhead Door
Contact
7500 Acoustic
Glass Break Detector
9500 Dual Technology
Glass Break Detector
Dual element PIR eith built-in RPM
(connects directly to the polling loop).
• Must use serial number enrollment mode.
• Tamper protected.
• Anti-creep lookdown protection
• Includes Fresnel lenses for wide angle and long
range/curtain applications.
• Selectable pulse count
• Used to increase the polling loop current
128mA), to extend the polling loop wire run
length, and/or to provide individual,
electrically isolated loops. Connects to the
polling loop and is powered from panel's
auxiliary power or by a separate power
supply with battery backup.
• One piece photoelectric smoke detector
with built-in RPM.
• DIP switch programmable (64 addresses) or
serial number enrolled.
• One piece photoelectric smoke detector
57°C heat detector, and built-in RPM.
• DIP switch programmable (64 addresses) or
serial number enrolled.
• Form C relay rated at 2A, 28VAC/VDC with
contact supervision
• One class B/style B EOLR-supervised aux
input zone
• Serial number ID programmed by control
• Tamper-protected cover
• Recessed (12.7mm dia.) magnetic reed
contact with built-in RPM.
• Serial number ID "enrolled" by control panel.
• Accommodates up to 2 zones via polling
loop.
• Small enough to conceal inside various sensors.
• Left zone can be EOLR supervised, can accept
either open or closed circuit switch sensors.
• Right zone is unsupervised and can only be used
with closed circuit sensors
• Usable with double pole keyswitch for keyswitch
by partition usage
• Serial number ID "enrolled" by control
• Accommodates 1 zone via polling loop
• Small enough to conceal inside various sensors.
• Serial number ID "enrolled" by control
• Surface mount magnetic reed contact with
built-in RPM.
• 1.5m jacketed cable.
• Serial Number ID "enrolled" by control.
• Aluminium overhead door/roller shutter
contact
• 0.6m armored cable
• Serial number ID "enrolled" by control.
• Glass break detector with built-in RPM.
• DIP switch programmable (64 addresses).
• Dual technology glass-break detector with
built-in RPM.
• DIP switch programmable (64 addresses).
• Keypad controlled test
– 29 –