Verifying The Dhcp Relay Configuration - Alcatel OmniSwitch 6624 Network Configuration Manual

Verifying the DHCP Relay Configuration

Verifying the DHCP Relay Configuration
To display information about the DHCP Relay and BOOTP/DHCP, use the show commands listed below.
For more information about the resulting displays from these commands, see the OmniSwitch CLI Refer-
ence Guide. An example of the output for the
Setting Up DHCP Relay" on page
show ip helper
show ip helper stats
page 15-12
show ip helper
15-3.
Displays the current forward delay time, the maximum number of hops,
the forwarding option (standard or AVLAN only), and each of the
DHCP server IP addresses configured.
Displays the number of packets the DHCP Relay service has received
and transmitted, the number of packets dropped due to forward delay
and maximum hops violations, and the number of packets processed
since the last time these statistics were displayed.
OmniSwitch 6624/6648 Network Configuration Guide
Configuring DHCP Relay
command is also given in "Quick Steps for
April 2004