Avlan Configuration Overview - Alcatel OmniSwitch 6624 Network Configuration Manual

Hide thumbs Also See for OmniSwitch 6624:
Table of Contents

Advertisement

AVLAN Configuration Overview

AVLAN Configuration Overview
Configuring authenticated VLANs requires several major steps. The steps are outlined here and described
throughout this chapter. See
implementing the commands used in these procedures.
1
Set up authentication clients. See
2
Configure at least one authenticated VLAN. A router port must be set up in at least one authenti-
cated VLAN for the DHCP relay. See
3
Configure at least one authenticated mobile port. Required for connecting the clients to the switch.
See
"Configuring Authenticated Ports" on page
4
Set up the DHCP server. Required if you are using Telnet or Web browser clients. Required for any
clients that need to get IP addresses after authentication. See
page
18-29.
5
Configure the authentication server authority mode. See
on page
18-32.
6
Specify accounting servers for authentication sessions. Optional; accounting may also be done
through the switch logging feature in the switch. See
The following is a summary of commands used in these procedures.
Commands
vlan authentication
vlan router ip
vlan port mobile
vlan port authenticate
aaa avlan dns
ip helper address
aaa avlan default dhcp
ip helper avlan only
aaa vlan no
aaa ldap-server
aaa radius-server
aaa authentication vlan single-mode
aaa authentication vlan multiple-mode
aaa accounting vlan
page 18-4
"Sample AVLAN Configuration" on page 18-5
"Setting Up Authentication Clients" on page
"Configuring Authenticated VLANs" on page
18-28.
"Specifying Accounting Servers" on page
Used for ...
Enabling authentication on VLAN(s)
Setting up a router port on the authenticated
VLAN.
Creating authenticated port(s)
Configuring a DNS name; required for Web
browser clients
Configuring the DHCP server; required for for
Telnet and Web browser clients.
Removing a user from an authenticated VLAN
Setting up switch communication with authenti-
cation servers
Enabling authentication and setting the authority
mode for servers
Specifying accounting for AVLAN sessions.
OmniSwitch 6624/6648 Network Configuration Guide
Configuring Authenticated VLANs
for a quick overview of
18-7.
18-26.
"Setting Up the DHCP Server" on
"Configuring the Server Authority Mode"
18-35.
April 2004

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch 6648

Table of Contents