Displaying The Memory Monitor Size Statistics - Alcatel OmniSwitch 6624 Network Configuration Manual

Monitoring Memory

Displaying the Memory Monitor Size Statistics

The debug memory monitor show log size
entering the size variable to view size statistics, a display similar to the following should appear:
-> debug memory monitor show log size
Lower Upper
Limit Limit
------------+----------+------------+------------------
0 16
16 32
32 64
64 128
128 256
256 512
512 1024
1024 2048
2048 4096
4096 8192
8192 16384
16384 32768
32768 65536
65536
->
In the screen sample shown above, the Lower Limit and Upper Limit fields display statistics indicating
the lower limit and upper limit of the memory (range) being sampled. The Currently Allocated and
Cumulatively Allocated fields display statistics indicating the amount of memory currently allocated and
cumulatively allocated to the specified size ranges (in bytes). For example, statistics displayed in the last
entry in the table indicate that 5130020 bytes are currently allocated and 25675316 bytes were cumula-
tively allocated for the memory range greater than or equal to 65536 bytes.
OmniSwitch 6624/6648 Network Configuration Guide
command can display memory monitoring size statistics. By
Currently Cumulatively
Allocated Allocated
14439 31689
6299 7704923
4833 373109
44248 145775
12367 122315
52096 228673
26778 365552
24572 358630
49648 274071
50793 1534291
478292 673610
431784 1075783
850216 1588017
5130020 25675316
April 2004
Configuring Debug Memory Commands
page 26-9