802.1X Specifications; 802.1X Defaults - Alcatel OmniSwitch 6624 Network Configuration Manual

802.1X Specifications

802.1X Specifications
RFCs Supported
IEEE Standards Supported

802.1X Defaults

The following table lists the defaults for 802.1X port configuration configuration through the
command and the relevant command keywords:
Description
Port control in both directions or
incoming only.
Port control authorized on the
port.
The time during which the port
will not accept an 802.1X
authentication attempt.
The time before an EAPOL
Request Identity will be re-trans-
mitted.
Number of seconds before the
switch will time out an 802.1X
user who is attempting to
authenticate.
Maximum number of times the
switch will retransmit an authen-
tication request before it times
out.
Amount of time that must expire
before a re-authentication
attempt is made.
Whether or not the port is re-
authenticated.
page 19-2
RFC 2284–PPP Extensible Authentication Protocol (EAP)
RFC 2865–Remote Authentication Dial In User Service
(RADIUS)
RFC 2866–RADIUS Accounting
RFC 2867–RADIUS Accounting Modifications for Tun-
nel Protocol Support
RFC 2868–RADIUS Attributes for Tunnel Protocol Sup-
port
RFC 2869–RADIUS Extensions
IEEE 802.1X-2001–Standard for Port-based Network
Access Control
802.1X RADIUS Usage Guidelines
Keyword
direction {both | in}
port control {force-authorized |
force-unauthorized | auto}
quiet-period
tx-period
supp-timeout
max-req
re-authperiod
no reauthentication |
reauthentication
OmniSwitch 6624/6648 Network Configuration Guide
Configuring 802.1X
802.1x
Default
both
auto
60 seconds
30 seconds
30 seconds
2
3600 seconds
no reauthentication
April 2004