Configuring QoS
To remove the save option from a policy rule, use no with the save keyword. For example:
-> policy rule rule5 no save
To reconfigure the rule as saved, use the policy rule command with the save option. For example:
-> policy rule rule5 save
For more information about the configuration snapshot, write memory, and copy running-config
working commands, see the OmniSwitch 6624/6648 Switch Management Guide and the OmniSwitch CLI
Reference Guide.
For more information about applying rules, see
Logging Rules
Logging a rule may be useful for determining the source of firewall attacks. To specify that the switch
should log information about flows that match the specified policy rule, use the policy rule command with
the log option. For example:
-> policy rule rule5 log
To stop the switch from logging information about flows that match a particular rule, use no with the log
keyword. For example:
-> policy rule rule5 no log
Deleting Rules
To remove a policy rule, use the no form of the command.
-> no policy rule rule1
The rule will be deleted after the next qos apply.
OmniSwitch 6624/6648 Network Configuration Guide
"Applying the Configuration" on page
April 2004
Creating Policies
21-46.
page 21-29