Verifying 802.1Q Configuration - Alcatel OmniSwitch 6624 Network Configuration Manual

Configuring 802.1Q
The following steps apply to Stack 3. They will attach ports 4/1 and 4/2 as link aggregation group 5 to
VLAN 3.
1 Configure static link aggregation group 5 by entering the following:
-> static linkagg 5 size 2
2 Assign ports 4/1 and 4/2 to static link aggregation group 5 by entering the following two commands:
-> static agg 4/1 agg num 5
-> static agg 4/2 agg num 5
3 Create VLAN 3 by entering the following:
-> vlan 3
4
Configure 802.1Q tagging with a tagging ID of 3 on static link aggregation group 5 (on VLAN 3) by
entering the following:
-> vlan 3 802.1q 5
5 Check the configuration using the
-> show 802.1q 5
Tagged VLANS
-------------+-------------------------------------------------+
3

Verifying 802.1Q Configuration

To display information about the ports configured to handle tagging, use the following show command:
show 802.1q
For more information about the resulting display, see
OmniSwitch CLI Reference Guide.
OmniSwitch 6624/6648 Network Configuration Guide
show 802.1q
Internal Description
TAG AGGREGATE 5 VLAN 3
Displays 802.1Q tagging information for a single port or a link aggrega-
tion group.
command, as follows:
Chapter 15, "802.1Q Commands,"
April 2004
Verifying 802.1Q Configuration
in the
page 9-11