Interaction With Cli Policies; Verifying The Policy Server Configuration - Alcatel OmniSwitch 6624 Network Configuration Manual

Managing Policy Servers

Interaction With CLI Policies

Policies configured via PolicyView can only be modified through PolicyView. They cannot be modified
through the CLI. Any policy management done through the CLI only affects policies configured through
the CLI. For example, the qos flush command only removes CLI policies; LDAP policies are not affected.
Also, the policy server flush command removes only LDAP policies; CLI policies are not affected.
Note. If polices are applied from PolicyView or vice versa, it will activate all current configuration.
For more information about configuring policies through the CLI, see

Verifying the Policy Server Configuration

To display information about authentication and policy servers, use the following commands:
show policy server
show policy server long
show policy server statistics
show policy server rules
show policy server events
OmniSwitch 6624/6648 Network Configuration Guide
Displays information about servers from which policies may be down-
loaded to the switch.
Displays detailed information about an LDAP policy server.
Displays statistics about policy directory servers.
Displays the names of policies originating on a directory server that
have been downloaded to the switch.
Displays any events related to a directory server.
April 2004
Verifying the Policy Server Configuration
Chapter 21, "Configuring QoS."
page 20-7