Managing Source Learning
Displaying MAC Address Table Information
To display MAC Address Table entries, statistics, and aging time values, use the show commands listed
below:
show mac-address-table
show mac-address-table count
show mac-address-table aging-time
For more information about the resulting displays from these commands, see the OmniSwitch CLI Refer-
ence Guide. An example of the output for the show mac-address-table and show mac-address-table
aging-time commands is also given in
OmniSwitch 6624/6648 Network Configuration Guide
Displays a list of all MAC addresses known to the MAC address
table, including static MAC addresses.
Displays a count of the different types of MAC addresses
(learned, permanent, reset, and timeout). Also includes a total
count of all addresses known to the MAC address table.
Displays the current MAC address aging timer value by switch or
VLAN.
"Sample MAC Address Table Configuration" on page
April 2004
Displaying MAC Address Table Information
2-2.
page 2-7