Defining Vlan Rules; Vlan Rules Specifications; Vlan Rules Defaults - Alcatel OmniSwitch 6624 Network Configuration Manual

Hide thumbs Also See for OmniSwitch 6624:

Table of Contents

IEEE Standards Supported

Maximum number of VLANs per switch

Maximum number of rules per VLAN

Maximum number of rules per switch

Switch ports eligible for VLAN rule classifi-

cation (dynamic VLAN assignment)

Switch ports not eligible for VLAN rule

classification

CLI Command Prefix Recognition

Parameter Description

IP network address rule subnet mask

IPX network address rule encapsulation

802.1Q–Virtual Bridged Local Area Networks

802.1v–VLAN Classification by Protocol and Port

802.1D–Media Access Control Bridges

8129 of each rule type, except for a DHCP generic

rule because only one is allowed per switch.

Mobile 10/100 Ethernet and gigabit ports.

Non-mobile (fixed) ports.

802.1Q tagged fixed ports.

Link aggregate ports.

All VLAN management commands support prefix

recognition. See the "Using the CLI" chapter in the

OmniSwitch 6624/6648 Switch Management Guide

for more information.

OmniSwitch 6624/6648 Network Configuration Guide

Defining VLAN Rules

The IP address class range;

Class A, B, or C.

Omniswitch 6648