Quick Steps For Configuring 802.1X - Alcatel OmniSwitch 6624 Network Configuration Manual

Quick Steps for Configuring 802.1X

Quick Steps for Configuring 802.1X
1 Configure the port as a mobile port and an 802.1X port using the following vlan port commands:
-> vlan port mobile 3/1
-> vlan port 3/1 802.1x enable
The port is set up automatically with 802.1X defaults. See
tion about the defaults. For more information about vlan port commands, see
to VLANs."
2
Configure the RADIUS server to used for port authentication.
-> aaa radius-server rad1 host 10.10.2.1 timeout 25
See Chapter 17, "Managing Authentication
authentication servers for 802.1X authentication.
Note. If 802.1X users will be authenticating into an authenticated VLAN, the VLAN must be configured
with the vlan authentication
see Chapter 4, "Configuring VLANs."
3
Associate the RADIUS server (or servers) with authentication for 802.1X ports.
-> aaa authentication 802.1x rad1
4
(Optional) Associate the server (or servers) to be used for accounting (logging) 802.1X sessions. For
example:
-> aaa accounting 802.1x rad2 ldap3 local
5
(Optional) Configure port-access control parameters for the 802.1X port using the
-> 802.1x 3/1 quiet-period 45 max-req 3
Note. Verify the 802.1X port configuration using the
-> show 802.1x 3/1
show 802.1x slot/port=3/1
authenticator PAE state
backend authenticator state = IDLE
direction
operational directions
port-control
port status
quiet-period (seconds)
tx-period (seconds)
supp-timeout (seconds)
server-timeout (seconds)
max-req
re-authperiod (seconds)
reauthentication
See the OmniSwitch CLI Reference Guide for information about the fields in this display.
page 19-4
Servers,"for more information about configuring RADIUS
command. For information about configuring VLANs with authentication,
show 802.1x
= CONNECTING
= both
= both
= auto
= Unauthorized
= 60
= 3600
= 30
= 30
= 2
= 3600
= no
OmniSwitch 6624/6648 Network Configuration Guide
"802.1X Defaults" on page 19-2
Chapter 6, "Assigning Ports
command:
Configuring 802.1X
for informa-
802.1x command.
April 2004