Configuring Ethernet Ports
Ethernet Port Defaults
The following table shows Ethernet port default values.
Parameter Description
Trap Port Link Messages
Flow Control
Flow Control Wait Time
Interface Line Speed
Duplex Mode
Interface Configuration
Inter-Frame Gap
Maximum Flood Rate (for
Broadcast Traffic)
Maximum Flood Rate (for
Multicast Traffic)
Peak Flood Rate Configuration
Auto negotiation
Crossover
Flow (pause)
OmniSwitch 6624/6648 Network Configuration Guide
Command
trap port link
flow
flow wait time
interfaces speed
interfaces duplex
interfaces admin
interfaces ifg
interfaces flood
interfaces flood multicast
interfaces flood rate
interfaces autoneg
interfaces crossover
interfaces flow
April 2004
Ethernet Port Defaults
Default Value/Comments
Disabled
Disabled
0 microseconds
Auto
Auto (copper ports)/Full (fiber
ports)
Up (Enabled)
12 bytes
Enable
Disable
42 Mbps (Fast Ethernet)
496 Mbps (Gigabit Ethernet)
Enable
Auto for all copper ports;
Disable for all fiber modules
Enable
page 1-3