Static Link Aggregation Specifications
Static Link Aggregation Specifications
The table below lists specifications for static (OmniChannel) groups.
Maximum number of link aggregation groups per
stack (composed of up to eight OmniSwitch 6600
Series switches)
Maximum number of link aggregation groups per
OmniSwitch 6624 or 6600-U24 switch
Maximum number of link aggregation groups per
OmniSwitch 6648 switch
Number of links per group supported on a single
switch
Number of links per group supported in a stack
Range for optional group name
CLI Command Prefix Recognition
Static (OmniChannel) Link Aggregation Default
Values
The table below lists default values and the commands to modify them for static (OmniChannel) aggre-
gate groups.
Parameter Description
Administrative State
Group Name
page 10-2
30
4
8
2, 4, or 8
2, 4, 8, or 16
1 to 255 characters
All static link aggregation configuration commands
support prefix recognition. (Static link aggregation
show commands do not support prefix recognition.)
See the "Using the CLI" chapter in the OmniSwitch
6624/6648 Switch Management Guide for more infor-
mation.
Command
static linkagg admin state
static linkagg name
OmniSwitch 6624/6648 Network Configuration Guide
Configuring Static Link Aggregation
Default Value/Comments
enabled
No name configured
April 2004