Switch Health; Switch Health Specifications - Alcatel OmniSwitch 6624 Network Configuration Manual

Diagnosing Switch Problems

Switch Health

The following sections detail the specifications, defaults, and quick set up steps for the switch health
feature. Detailed procedures are found in

Switch Health Specifications

Health Functionality Supported
Monitored Resource Utilization Levels
Resource Utilization Raw Sample Values Saved for previous 60 seconds.
Resource Utilization Current Sample
Values
Resource Utilization Maximum
Utilization Value
Utilization Value = 0
Utilization Value = 1
Percentage Utilization Values
Resource Threshold Levels
Rising Threshold Crossing
Falling Threshold Crossing
Threshold Crossing Traps Supported
OmniSwitch 6624/6648 Network Configuration Guide
"Monitoring Switch Health" on page
–Switch level CPU Utilization Statistics
(percentage);
–Switch/module/port level Input Utilization
Statistics (percentage);
–Switch/module/port level Input/Output
Utilization Statistics (percentage);
–Switch level Memory Utilization Statistics
(percentage);
–Device level (e.g., Chassis/CMM)
Temperature Statistics (Celsius).
–Most recent utilization level;
–Average utilization level during last minute;
–Average utilization level during last hour;
–Maximum utilization level during last hour.
Stored.
Calculated for previous 60 seconds and stored.
Indicates that none of the resource was measured
for the period.
Indicates that a non-zero amount of the resource
(less than 2%) was measured for the period.
Calculated based on Resource Measured During
Period/Total Capacity.
Apply automatically across all levels of switch
(switch/module/port).
A Resource Threshold was exceeded by its cor-
responding utilization value in the current cycle.
A Resource Threshold was exceeded by its cor-
responding utilization value in the previous
cycle, but is not exceeded in the current cycle.
Device, module, port-level threshold crossings.
April 2004
Switch Health
24-23.
page 24-7