Alcatel OmniSwitch 6624 Network Configuration Manual page 447

Configuring ACLs
Important. If you set the global bridged disposition (using the qos default bridged disposition
command) to deny or drop, it will result in dropping all traffic from the switch that does not match any
policy to accept traffic. You must create policies (one for source and one for destination) to allow traffic
on the switch.
If you set the bridged disposition to deny or drop, and you configure Layer 2 ACLs, you will need two
rules for each type of filter. For more information, see
OmniSwitch 6624/6648 Network Configuration Guide
"Layer 2 ACLs" on page
April 2004
Setting the Global Disposition
22-12.
page 22-9