Quick Steps For Configuring Memory Monitoring - Alcatel OmniSwitch 6624 Network Configuration Manual

Monitoring Memory

Quick Steps for Configuring Memory Monitoring

1 Use the following commands to enable Memory Monitoring. (Memory Monitoring is factory disabled
by default.) For example:
-> debug memory monitor enable
2
To view Memory Monitoring log information, enter the
The display is similar to the one shown below:
-> debug memory monitor show log
Task
Name Comments Addr
---------+--------+-------+------+---------+---------+----------+--------------
tssApp_2* TCB Stac 00ca1550 20680
tssApp_2* Vx B Sem 02317ca8
tssApp_2* Vx B Sem 02317f78
tssApp_2*
tssApp_2*
tssApp_2*
tssApp_2*
CliShell0 Vx C Sem 035fe590
The information displayed above includes the task that owns the memory block, the type of memory
block that has been allocated, the address and size of the memory block, the address of the operating
system call that allocated the memory block, the function that contained the call that allocated the
memory block, and the Calling Function and Previous Caller function (that called the above-mentioned
functions).
Note. Optional. Display the Memory Monitoring Size Statistics. The display is similar to the one shown
below.
-> debug memory monitor show log size
Lower Upper
Limit Limit
-----+-----+-------------+-------------+
0 16
16 32
32 64
64 128
128 256
256 512
512 1024
1024 2048
2048 4096
4096 8192
8192 16384
16384 32768
32768 65536
65536
For more information about this command, see
the "Switch Logging Commands" chapter in the OmniSwitch CLI Reference Guide.
OmniSwitch 6624/6648 Network Configuration Guide
Memory Memory Addr of OS func
Size
28
28
0107be78 5121
023182b0 16
024fdc90 9
016d6548 288
28
Currently Cummulatively
Allocated Allocated
14439
6299 7704923
4833
44248
12367
52096
26778
24572
49648
50793 1534291
478292
431784 1075783
850216 1588017
5130020 25675316
Quick Steps for Configuring Memory Monitoring
debug memory monitor show log
Calling
OS call Called Function
0013a180 objAllocEx taskSpawn ssAppChild
001374d0 objAlloc
001374d0 objAlloc
0012cfc8 malloc
0012cfa8 malloc
00105fb0 malloc
000af228 malloc
0011f038 semCCreate zcSelect
31689
373109
145775
122315
228673
365552
358630
274071
673610
"Displaying the Memory Monitor Log" on page 26-5
April 2004
command.
Previous
Caller
pipe ssAppChild
pipe ssAppChild
pipe ssAppChild
pipe ssAppChild
pipe ssAppChild
ssAppChild mip_msg_qu
mip_msg_do
page 26-3
or