Qos Port Defaults; Policy Rule Defaults - Alcatel OmniSwitch 6624 Network Configuration Manual

QoS Defaults

QoS Port Defaults

Use the qos port reset
Description
Whether the port is trusted or
untrusted
Maximum reserve bandwidth
Maximum signalled bandwidth
(via RSVP)
Maximum bandwidth
Maximum default depth
Maximum default buffers

Policy Rule Defaults

The following are defaults for the
Description
Policy rule enabled or disabled
Determines the order in which
rules are searched
Whether or not the rule is reflex-
ive
Whether the rule is saved to
flash immediately
*However, policy rules configured with source and destination conditions and actions with disposi-
tion, priority, or 802.1P configured are automatically bidirectional.
page 21-10
command to reset port settings to the defaults.
Command/keyword
qos port trusted
qos port maximum reserve
bandwidth
qos port maximum signal
bandwidth
qos port maximum bandwidth
qos port maximum default depth
qos port maximum default buffers
policy rule command:
Keyword
enable | disable
precedence
reflexive
save
OmniSwitch 6624/6648 Network Configuration Guide
Configuring QoS
Default
802.1Q and mobile ports are
always trusted; other ports are
untrusted
port bandwidth; currently not
supported.
port bandwidth; currently not
supported.
port bandwidth;currently not
supported.
2048 bytes; currently not sup-
ported.
64 buffers (ENI interfaces)
192 buffers (GNI interfaces);
currently not supported.
Default
enabled
0
Rules cannot be configured to be
reflexive. Reflexive rules are not
supported on the OmniSwitch
*
6624/6648.
Save option is enabled.
April 2004