Managing Authentication Servers; In This Chapter - Alcatel OmniSwitch 6624 Network Configuration Manual
Hide thumbs
Also See for OmniSwitch 6624:
- Troubleshooting manual (614 pages) ,
- Management manual (264 pages) ,
- Network configuration manual (654 pages)
Table of Contents
Advertisement
17 Managing Authentication
This chapter describes authentication servers and how they are used with the switch. The types of servers
described include Remote Authentication Dial-In User Service (RADIUS), Lightweight Directory Access
Protocol (LDAP), and SecurID's ACE/Server.
In This Chapter
The chapter includes some information about attributes that must be configured on the servers, but it
primarily addresses configuring the switch through the Command Line Interface (CLI) to communicate
with the servers to retrieve authentication information about users.
Configuration procedures described include:
Configuring an ACE/Server. This procedure is described in
•
Configuring a RADIUS Server. This procedure is described in
•
Configuring an LDAP Server. This procedure is described in
•
For information about using servers for authenticating users to manage the switch, see the "Switch Secu-
rity" chapter in the OmniSwitch 6624/6648 Switch Management Guide.
For information about using servers to retrieve authentication information for Layer 2 Authentication users
(authenticated VLANs), see
OmniSwitch 6624/6648 Network Configuration Guide
Chapter 18, "Configuring Authenticated VLANs."
April 2004
Servers
"ACE/Server" on page
17-8.
"RADIUS Servers" on page
"LDAP Servers" on page
17-9.
17-15.
page 17-1
Advertisement
Table of Contents
