Dynamic Link Aggregation Specifications
Dynamic Link Aggregation Specifications
The table below lists specifications for dynamic aggregation groups and ports:
IEEE Specifications Supported
Maximum number of link aggregation groups per
stack (composed of up to eight OmniSwitch 6600
Series switches)
Maximum number of link aggregation groups per
OmniSwitch 6600-U24 or 6600-U24 switch
Maximum number of link aggregation groups per
OmniSwitch 6648 switch
Range for optional group name
Number of links per group supported on a single
switch
Number of links per group supported in a stack
Group actor admin key
Group actor system priority
Group partner system priority
Group partner admin key
Port actor admin key
Port actor system priority
Port partner admin key
Port partner admin system priority
Port actor port
Port actor port priority
Port partner admin port
Port partner admin port priority
CLI Command Prefix Recognition
page 11-2
802.3ad — Aggregation of Multiple Link Segments
30
4
8
1 to 255 characters
2, 4, or 8
2, 4, 8, or 16
0 to 65535
0 to 65535
0 to 65535
0 to 65535
0 to 65535
0 to 255
0 to 65535
0 to 255
0 to 65535
0 to 255
0 to 65535
0 to 255
All dynamic link aggregation configuration com-
mands support prefix recognition. (Dynamic link
aggregation show commands do not support prefix
recognition.) See the "Using the CLI" chapter in the
OmniSwitch 6624/6648 Switch Management Guide
for more information.
OmniSwitch 6624/6648 Network Configuration Guide
Configuring Dynamic Link Aggregation
April 2004