Port Assignment Specifications; Port Assignment Defaults - Alcatel OmniSwitch 6624 Network Configuration Manual

Port Assignment Specifications

Port Assignment Specifications
IEEE Standards Supported
Maximum VLANs per switch
Maximum VLAN port associations
Switch ports eligible for port mobility.
Switch ports eligible for dynamic VLAN
assignment.
Maximum VLAN associations per mobile
port using VLAN rule classification.
Maximum VLAN associations per mobile
port using VLAN mobile tag classification.
Switch ports eligible for static VLAN
assignment.

Port Assignment Defaults

Parameter Description
Configured default VLAN
Port mobility
Bridge mobile port traffic that
doesn't match any VLAN rules on
the configured default VLAN
Drop mobile port dynamic VLAN
assignments when learned mobile
port traffic that triggered the assign-
ment ages out
Enable Layer 2 authentication on the
mobile port
Enable 802.1x port-based access
control on a mobile port
page 6-2
802.1Q–Virtual Bridged Local Area Networks
802.1D–Media Access Control Bridges
4094 (including default VLAN 1)
32768
Untagged 10/100 Ethernet and gigabit ports that are
not members of a link aggregate.
Mobile ports.
1 (2 if using IP and IPX protocol rules)
32768
Non-mobile (fixed) ports.
Mobile ports.
Link aggregate of ports.
Command
vlan port default
vlan port mobile
vlan port default vlan
vlan port default vlan restore
vlan port authenticate
vlan port 802.1x
OmniSwitch 6624/6648 Network Configuration Guide
Assigning Ports to VLANs
Default
All ports initially associated
with default VLAN 1.
Disabled
Disabled
Enabled
Disabled
Disabled
April 2004