Displaying Ipms Configurations And Statistics - Alcatel OmniSwitch 6624 Network Configuration Manual

Configuring IP Multicast Switching

Displaying IPMS Configurations and Statistics

Alcatel's IP Multicast Switching (IPMS) show commands provide tools to monitor IPMS traffic and
settings and to troubleshoot problems. These commands are described below:
show ip multicast switching
show ip multicast groups
show ip multicast neighbors
show ip multicast queriers
show ip multicast forwarding
show ip multicast policy-cache
If you are interested in a quick look at IPMS groups on your switch you could use the
groups command. For example:
-> show ip multicast groups
Destination IP
--------------------+--------------------+--------------------+----+-----+------
224.0.0.9
225.10.10.10
Note. See the "IP Multicast Switching Commands" chapter in the OmniSwitch CLI Reference Guide for
complete documentation on IPMS show commands.
OmniSwitch 6624/6648 Network Configuration Guide
Displays the current IPMS configuration on a switch.
Displays all detected multicast groups that have members. If you do not
specify an IP address then all multicast groups on the switch will be dis-
played.
Displays all neighboring multicast routers.
Displays all multicast queriers.
Displays the IPMS multicast forwarding table. If you do not specify a
multicast group IP address then the forwarding table for all multicast
groups will be displayed.
Displays the active policies being enforced in the IPMS policy cache.
Client IP Source IP (IGMPv3)
11.0.0.1 224.0.0.9
10.0.0.1
April 2004
Displaying IPMS Configurations and Statistics
show ip multicast
Slot/
VLAN Port
3
2
Expire
3/10 186
3/9 254
page 23-15