Configuring Ethernet Ports
Note. Optional. To verify the Ethernet port configuration, use the
is similar to the one shown below, and provides additional statistics about received and transmitted bytes
and frames.
Slot/Port
1/1 :
Operational Status
Type
MAC address
BandWidth (Megabits)
Long Accept
Long Frame Size(Bytes) : 1518,
Input :
Bytes Received
Lost Frames
Unicast Frames
Broadcast Frames
Multicast Frames
UnderSize Frames
OverSize Frames
Collision Frames
Error Frames
CRC Error Frames
Alignments Error
Output :
Bytes transmitted :
Lost Frames
Unicast Frames
Broadcast Frames
Multicast Frames
UnderSize Frames
OverSize Frames
Collision Frames
Error Frames
For more information about available show commands, refer to the OmniSwitch CLI Reference Guide.
OmniSwitch 6624/6648 Network Configuration Guide
: down,
: Fast Ethernet,
: 00:d0:95:12:ed:04,
: 100,
: Disable,
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
April 2004
Configuring Ethernet Ports Tutorial
show interfaces
command. The display
Duplex
Runt Accept
Runt Size(Bytes) : 64
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
0,
0,
0,
0,
0,
0,
0,
0,
0
: Full,
: Disable,
page 1-5