Application Example - Alcatel OmniSwitch 6624 Network Configuration Manual

Hide thumbs Also See for OmniSwitch 6624:

Table of Contents

Configuring 802.1Q

Application Example

In this section the steps to create 802.1Q connections between switches are shown.

The following diagram shows a simple network employing 802.1Q on both regular ports and link aggrega-

tion groups.

The following sections show how to create the network illustrated above.

Connecting Stack 1 and Stack 2 Using 802.1Q

The following steps apply to Stack 1. They will attach port 1/1 to VLAN 2, and set the port to accept

802.1Q tagged traffic and untagged traffic.

Create VLAN 2 by entering vlan 2 as shown below (VLAN 1 is the default VLAN for the switch):

Set port 1/1 as a tagged port and assign it to VLAN 2 by entering the following:

-> vlan 2 802.1q 1/1

Check the configuration using the

-> show 802.1q 1/1

Acceptable Frame Type

Force Tag Internal

Tagged VLANS

-------------+-------------------------------------------------+

OmniSwitch 6624/6648 Network Configuration Guide

OmniSwitch 6648

OmniSwitch 6648

OmniSwitch 6648

Any Frame Type

Internal Description

TAG PORT 1/1 VLAN 2

OmniSwitch 6648

OmniSwitch 6648

OmniSwitch 6648

command, as follows:

Application Example

Omniswitch 6648