Enabling Or Disabling Rmon Probes - Alcatel OmniSwitch 6624 Network Configuration Manual
Hide thumbs
Also See for OmniSwitch 6624:
- Troubleshooting manual (614 pages) ,
- Management manual (264 pages) ,
- Network configuration manual (654 pages)
Table of Contents
Advertisement
Remote Monitoring (RMON)
Enabling or Disabling RMON Probes
To enable or disable an individual RMON probe, enter the
ify the type of probe (stats/history/alarm), followed by the entry number (optional), as shown in the
following examples.
The following command enables RMON Ethernet Statistics probe number 4012:
-> rmon probes stats 4012 enable
The following command disables RMON History probe number 10240:
-> rmon probes history 10240 disable
The following command enables RMON Alarm probe number 11235:
-> rmon probes alarm 11235 enable
To enable or disable an entire group of RMON probes of a particular flavor type (such as Ethernet
Statistics, History or Alarm), enter the command without specifying an entry-number, as shown in the
following examples.
The following command disables all currently defined (disabled) RMON Ethernet Statistics probes:
-> rmon probes stats disable
The following command enables all currently defined (disabled) RMON History probes:
-> rmon probes history enable
The following command enables all currently defined (disabled) RMON Alarm probes:
-> rmon probes alarm enable
Notes. Network activity on subnetworks attached to an RMON probe can be monitored by Network
Management Software (NMS) applications.
page 24-18
rmon probes
OmniSwitch 6624/6648 Network Configuration Guide
Diagnosing Switch Problems
CLI command. Be sure to spec-
April 2004
Advertisement
Table of Contents
