Interaction With Other Features - Alcatel OmniSwitch 6624 Network Configuration Manual

Configuring QoS
It is possible to configure a valid QoS rule that is active on the switch, however the switch is not able to
enforce the rule because some other switch function (for example, routing) is disabled. See the condition
and condition/action combinations tables for more information about valid combinations
Combinations" on page 21-6

Interaction With Other Features

QoS policies may be an integral part of configuring other switch features, such as Link Aggregation. In
addition, QoS settings may affect other features in the switch; or QoS settings may require that other
switch features be configured in a particular way.
A summary of related features is given here:
Dynamic Link Aggregates—Policies may be used to prioritize dynamic link aggregation groups. For
•
details, see Chapter 11, "Configuring Dynamic Link Aggregation."
802.1Q—Tagged ports are always trusted, regardless of QoS settings. For information about configur-
•
ing ports with 802.1Q, see
Mobile Ports—Mobile ports are always trusted, regardless of QoS settings. For information about
•
setting up mobile ports, see
LDAP Policy Management—Policies may also be configured through the PolicyView application and
•
stored on an attached LDAP server. LDAP policies may only be modified through PolicyView. For
information about setting up a policy server and managing LDAP policies, see
Policy Servers."
OmniSwitch 6624/6648 Network Configuration Guide
and "Condition/Action Combinations" on page
Chapter 9, "Configuring 802.1Q."
Chapter 6, "Assigning Ports to VLANs."
April 2004
Interaction With Other Features
("Condition
21-7).
Chapter 20, "Managing
page 21-5