Verifying The Dhcp Relay Configuration - Alcatel OmniSwitch 6600 Family Network Configuration Manual

Configuring DHCP Relay

Verifying the DHCP Relay Configuration

To display information about the DHCP Relay and BOOTP/DHCP, use the show commands listed below.
For more information about the resulting displays from these commands, see the OmniSwitch CLI Refer-
ence Guide. An example of the output for the
Setting Up DHCP Relay" on page
show ip helper
show ip helper stats
show ip udp relay service
show ip udp relay statistics
show ip udp relay destination
OmniSwitch 6600 Family Network Configuration Guide
show ip helper
18-4.
Displays the current forward delay time, the maximum number of hops,
the forwarding option (standard or AVLAN only), and each of the
DHCP server IP addresses configured.
Displays the number of packets the DHCP Relay service has received
and transmitted, the number of packets dropped due to forward delay
and maximum hops violations, and the number of packets processed
since the last time these statistics were displayed.
Displays current configuration for UDP services by service name or by
service port number.
Displays the current statistics for each UDP port relay service. These
statistics include the name of the service, the forwarding VLAN(s) con-
figured for that service, and the number of packets the service has sent
and received.
Displays the VLAN assignments to which the traffic received on the
specified UDP service port is forwarded.
April 2006
Verifying the DHCP Relay Configuration
command is also given in "Quick Steps for
page 18-23