Ascii-File-Only Syntax - Alcatel OmniSwitch 6624 Network Configuration Manual

Hide thumbs Also See for OmniSwitch 6624:
Table of Contents

Advertisement

Configuring QoS
4
Use the qos apply command to apply the policy to the configuration. For example:
-> qos apply
Note. (Optional) To verify that the rule has been configured, use the show policy rule command. The
display is similar to the following:
-> show policy rule
my_rule
Cnd/Act:
+my_rule5
Cnd/Act:
mac1
Cnd/Act:
This command displays information about whether or not the indicated parameter may be used to classify
traffic based on policies that are configured on the switch. For more information about this display, see
"Verifying Policy Configuration" on page
An example of how the example configuration commands might display when entered sequentially on the
command line is given here:
-> policy condition cond3 source ip 10.10.2.3
-> policy action action2 priority 7
-> policy rule my_rule condition cond3 action action2
-> qos apply

ASCII-File-Only Syntax

When the policy rule, policy condition, and policy action commands as well as any of the condition
group commands are configured and saved in an ASCII file (typically through the snapshot command),
the commands included in the file will include syntax indicating the command's origin. The origin speci-
fies where the rule, condition, condition group, or action was created, either an LDAP server or the CLI
(from ldap or from cli). For built-in QoS objects, the syntax displays as from blt. For example:
-> policy action A2 from ldap disposition accept
The from option is configurable (for LDAP or CLI only) on the command line; however, it is not recom-
mended that a QoS object's origin be modified. The blt keyword indicates built-in; this keyword cannot
be used on the command line. For information about built-in policies and QoS groups, see
Are Used" on page
21-4.
OmniSwitch 6624/6648 Network Configuration Guide
Policy
From
cli
cond5 -> action2
cli
cond2 -> pri2
cli
dmac1 -> pri2
21-30.
April 2004
Prec
Enabled Inactive Reflexive
0
Yes
Yes
0
Yes
No
0
Yes
No
Creating Policies
No
No
No
"How Policies
page 21-23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch 6648

Table of Contents