Enabling Tagging With Link Aggregation - Alcatel OmniSwitch 6624 Network Configuration Manual

Configuring an 802.1Q VLAN

Enabling Tagging with Link Aggregation

To enable tagging on link aggregation groups, enter the link aggregation group identification number in
place of the slot and port number, as shown:
-> vlan 5 802.1q 8
(For further information on creating link aggregation groups, see
Aggregation," or Chapter 11, "Configuring Dynamic Link
To add tagging to a port or link aggregation group and label it with a text name enter the text identifica-
tion following the slot and port number or link aggregation group identification number. For example, to
enable tagging on link aggregation group 8 with a text name of agg port tag, enter the command in the
following manner:
-> vlan 5 802.1q 8 "agg port tag"
The tagged port would now also be labeled agg port tag. Note that you must use quotes around the text
description.
To remove 802.1Q tagging from a selected port, use the same command as above with a no keyword
added, as shown:
-> vlan 5 no 802.1q 8
Note. The link aggregation group must be created first before it can be set to use 802.1Q tagging
For more specific information, see the
Guide.
page 9-6
Aggregation.")
vlan 802.1q command section in the OmniSwitch CLI Reference
OmniSwitch 6624/6648 Network Configuration Guide
Configuring 802.1Q
Chapter 10, "Configuring Static Link
April 2004