Verifying Policy Configuration - Alcatel OmniSwitch 6624 Network Configuration Manual

Creating Policies

Verifying Policy Configuration

To view information about policy rules, conditions, and actions configured on the switch, use the follow-
ing commands:
show policy condition
show policy action
show policy rule
show active policy rule
When the command is used to show output for all pending and applied policy configuration, the following
characters may appear in the display:
character definition
+ Indicates that the policy rule has been modified or has
been created since the last qos apply.
- Indicates the policy object is pending deletion.
# Indicates that the policy object differs between the pend-
ing/applied objects.
For example:
-> show policy rule
my_rule
Cnd/Act:
+my_rule5
Cnd/Act:
mac1
Cnd/Act:
The above display indicates that my_rule is inactive and is not used to classify traffic on the switch (the
Inact field displays Yes). The rule my_rule5 has been configured since the last qos apply command was
entered, as indicated by the plus (+) sign. The rule will not be used to classify traffic until the next qos
apply. Only mac1 is actively being used on the switch to classify traffic.
page 21-30
Displays information about all pending and applied policy conditions or
a particular policy condition configured on the switch. Use the applied
keyword to display information about applied conditions only.
Displays information about all pending and applied policy actions or a
particular policy action configured on the switch. Use the applied key-
word to display information about applied actions only.
Displays information about all pending and applied policy rules or a par-
ticular policy rule. Use the applied keyword to display information
about applied rules only.
Displays applied policy rules that are active (enabled) on the switch.
Policy From Prec
cli
cond5 -> action2
cli
cond2 -> pri2
cli
dmac1 -> pri2
OmniSwitch 6624/6648 Network Configuration Guide
Enab Inact Refl Log Save
0 Yes Yes No
0 Yes No No
0 Yes No No
Configuring QoS
No Yes
No Yes
No Yes
April 2004