Quick Steps For Configuring Authentication Servers - Alcatel OmniSwitch 6624 Network Configuration Manual

Quick Steps For Configuring Authentication Servers

Quick Steps For Configuring Authentication
Servers
1 For RADIUS or LDAP servers, configure user attribute information on the servers. See
Servers" on page 17-9
2 Use the aaa radius-server
server(s). For example:
-> aaa radius-server rad1 host 10.10.2.1 10.10.3.5 key amadeus
-> aaa ldap-server ldap2 host 10.10.3.4 dn cn=manager password tpub base c=us
Note. (Optional) Verify the server configuration by entering the show aaa server command. For example:
-> show aaa server
Server name = rad1
Server type
IP Address 1
IP Address 2
Retry number
Timeout (in sec)
Authentication port
Accounting port
Server name = ldap2
Server type
IP Address 1
Port
Domain name
Search base
Retry number
Timeout (in sec)
See the CLI Reference Guide for information about the fields in this display.
3
If you are using ACE/Server, there is no required switch configuration; however, you must FTP the
sdconf.rec file from the server to the switch's /network directory.
4
Configure authentication on the switch. This step is described in other chapters. For a quick overview
of using the configured authentication servers with Authenticated VLANs, see
Overview" on page 18-4. For a quick overview of using the configured authentication servers with
Authenticated Switch Access, see the OmniSwitch 6624/6648 Switch Management Guide.
page 17-4
and "LDAP Servers" on page
and/or the aaa ldap-server
= RADIUS,
= 10.10.2.1,
= 10.10.3.5
= 3,
= 2,
= 1645,
= 1646
= LDAP,
= 10.10.3.4,
= 389,
= cn=manager,
= c=us,
= 3,
= 2,
OmniSwitch 6624/6648 Network Configuration Guide
Managing Authentication Servers
17-15.
command to configure the authentication
"RADIUS
"AVLAN Configuration
April 2004