Displaying Port Mirroring Status; Deleting A Mirroring Session - Alcatel OmniSwitch 6624 Network Configuration Manual

Diagnosing Switch Problems
Note. Port mirroring session parameters cannot be modified when a mirroring session is enabled. Before
you can modify parameters, the mirroring session must be disabled.
To disable a port mirroring session, enter the port mirroring command, followed by the port mirroring
session ID number and the keyword disable. The following command disables port mirroring session 6
(turning port mirroring off):
-> port mirroring 6 disable

Displaying Port Mirroring Status

To display port mirroring status, use the
mirroring sessions enter:
-> show port mirroring status
A screen similar to the following will be displayed:
Session Mirrored
slot/port
----------+----------+----------+--------------+----------+----------
6. 1/23
9. 2/1
To display a specific session enter show port mirroring status followed by the port mirroring session ID
number. For example:
-> show port mirroring status 6
Session Mirrored
slot/port
----------+----------+----------+--------------+----------+----------
6. 1/23
In this example, the status of the mirrored and mirroring ports in mirroring session 6 is displayed. The
locations of the mirrored and mirroring ports are shown, (slot 1, port 14 and slot 1, port 16, respectively),
along with the mirroring VLAN ID number (5), direction, and mirroring Status (port mirroring is OFF).

Deleting A Mirroring Session

The no form of the port mirroring
configuration between a mirrored port and a mirroring port.
To delete a mirroring session, enter the no port mirroring command, followed by the port mirroring
session ID number. For example:
-> no port mirroring 6
In this example, port mirroring session 6 is deleted.
Note. The port mirroring session identifier must always be specified.
OmniSwitch 6624/6648 Network Configuration Guide
show port mirroring status
Mirroring Mirror
slot/port Direction
1/24 bidirectional NONE
2/11 inport
Mirroring Mirror
slot/port Direction
1/24 bidirectional NONE
command can be used to delete a previously created mirroring session
April 2004
command. To display all port
Mirroring Mirroring
Vlan Status
OFF
7 ON
Mirroring Mirroring
Vlan Status
OFF
Port Mirroring
page 24-15