Radius Accounting Server Attributes - Alcatel OmniSwitch 6624 Network Configuration Manual

Managing Authentication Servers

RADIUS Accounting Server Attributes

The following table lists the standard attributes supported for RADIUS accounting servers. The attributes
in the radius.ini file may be modified if necessary.
Num. Standard Attribute
1 User-Name
4 NAS-IP-Address
5 NAS-Port
25 Class
40 Acct-Status-Type
42 Acct-Input-Octets
43 Acct-Output-Octets
44 Acct-Session
45 Acct-Authentic
46 Acct-Session
47 Acct-Input-Packets
48 Acct-Output-Packets
49 Acct-Terminal-Cause
OmniSwitch 6624/6648 Network Configuration Guide
Description
Used in access-request and account-request packets.
Sent with every access-request. Specifies which switches a
user may have access to. More than one of these attributes is
allowed per user.
Virtual port number sent with access-request and account-
request packets. Slot/port information is supplied in attribute
26 (vendor-specific).
Used to pass information from the server to the client and
passed unchanged to the accounting server as part of the
accounting-request packet.
Four values should be included in the dictionary file: 1 (acct-
start), 2 (acct-stop), 6 (failure), and 7 (acct-on). Start and stop
correspond to login/logout. The accounting-on message is sent
when the RADIUS client is started. This attribute also includes
an accounting-off value, which is not supported.
(Authenticated VLANs only) Tracked per port.
(Authenticated VLANs only) Tracked per port.
Unique accounting ID. (For authenticated VLAN users, Alca-
tel uses the client's MAC address.)
Indicates how the client is authenticated; standard values (1–3)
are not used. Vendor specific values should be used instead:
AUTH-AVCLIENT (4)
AUTH-TELNET (5)
AUTH-HTTP (6)
AUTH-NONE (0)
The start and stop time for a user's session can be determined
from the accounting log.
(Authenticated VLANs only) Tracked per port.
(Authenticated VLANs only) Tracked per port.
Indicates how the session was terminated:
NAS-ERROR
USER-ERROR
LOST CARRIER
USER-REQUEST
STATUS-FAIL
April 2004
RADIUS Servers
page 17-13