Interaction With Ldap Policies; Verifying The Applied Policy Configuration - Alcatel OmniSwitch 6624 Network Configuration Manual

Applying the Configuration

Interaction With LDAP Policies

The qos apply, qos revert, and qos flush commands do not affect policies created through the Policy-
View application. Separate commands are used for loading and flushing LDAP policies on the switch. See
Chapter 17, "Managing Authentication Servers,"

Verifying the Applied Policy Configuration

The policy show commands have an optional keyword (applied) to display only applied policy objects.
These commands include:
show policy condition
show policy action
show policy rule
show policy network group
show policy service
show policy service group
show policy mac group
show policy port group
show policy map group
show policy classify
For more information about these commands, see the OmniSwitch CLI Reference Guide.
page 21-48
for information about managing LDAP policies.
Displays information about all pending and applied policy conditions or
a particular policy condition configured on the switch. Use the applied
keyword to display information about applied conditions only.
Displays information about all pending and applied policy actions or a
particular policy action configured on the switch. Use the applied key-
word to display information about applied actions only.
Displays information about all pending and applied policy rules or a par-
ticular policy rule. Use the applied keyword to display information
about applied rules only.
Displays information about all pending and applied policy network
groups or a particular network group. Use the applied keyword to dis-
play information about applied groups only.
Displays information about all pending and applied policy services or a
particular policy service configured on the switch. Use the applied key-
word to display information about applied services only.
Displays information about all pending and applied policy service
groups or a particular service group. Use the applied keyword to display
information about applied groups only.
Displays information about all pending and applied MAC groups or a
particular policy MAC group configured on the switch. Use the applied
keyword to display information about applied groups only.
Displays information about all pending and applied policy port groups
or a particular port group. Use the applied keyword to display informa-
tion about applied groups only.
Displays information about all pending and applied policy map groups
or a particular map group. Use the applied keyword to display informa-
tion about applied groups only.
Sends Layer 2, Layer 3, or multicast information to the classifier to see
how the switch will handle the packet. Use the applied keyword to
examine only applied conditions.
OmniSwitch 6624/6648 Network Configuration Guide
Configuring QoS
April 2004