Summit Xgm2-2Xn Option Card - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit family
Hide thumbs Also See for Summit X150 Series:
Table of Contents

Advertisement

Summit X450-24t switch, running ExtremeXOS 11.2.0 (or later)
For current information about compatible XENPAK modules and the minimum required software, refer
to the most recent version of the ExtremeXOS Hardware and Software Compatibility Matrix.
For more information about XENPAK modules, refer to the Extreme Networks Pluggable Interface
Modules Installation Guide.
Note
The ExtremeXOS software also recognizes standards-based CX-4 XENPAKs; contact your
CX-4 module vendor to obtain these.
Mixing ZR XENPAKs with Other Types
The following table lists the supported combinations of XENPAK types using ZR XENPAKs in a Summit
X450 series switch.
You can either install one ZR XENPAK and leave one slot empty or install one ZR XENPAK and one SR
XENPAK. The Summit X450 series switch does not support any other XENPAK combinations when a
ZR XENPAK module is installed. You must put the specified modules in the specified slots, as shown in
the following table for the switch to discover the ZR XENPAK correctly.
Left Slot
ZR XENPAK
ZR XENPAK

Summit XGM2-2xn Option Card

The Summit XGM2-2xn option card allows you to add one or two 10-gigabit XENPAK modules to the
following switches:
Summit X350 series switch, running ExtremeXOS 12.1.2 (or later). Summit X350 series switches do
not support the LW XENPAK module in the XGM2-2xn card.
Summit X450a-24t switch, running ExtremeXOS 11.5.0 (or later)
Summit X450a-24tDC switch, running ExtremeXOS 11.5.0 (or later)
Summit X450a-24x switch, running ExtremeXOS 11.6.1 (or later)
Summit X450a-24xDC switch, running ExtremeXOS 11.6.1 (or later)
Summit X450a-48t switch, running ExtremeXOS 11.5.0 (or later)
Summit X450e-24p switch, running ExtremeXOS 11.5.0 (or later)
Summit X450e-48p switch, running ExtremeXOS 11.6.1 (or later)
Summit X450e-24t switch, running ExtremeXOS 12.5.1 (or later)
Summit X450e-48t switch, running ExtremeXOS 12.5.1 (or later)
Summit Family Hardware Installation Guide
Summit Option Cards and Versatile Interface Modules
Right Slot
Empty
SR XENPAK
139

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents