Extreme Networks Summit X150 Series Hardware Installation Manual page 278

Mid-Mounting a X670 or X770 Switch in a Two-Post Rack
1 On one side of the switch, set a mounting bracket against the switch housing, with the flange
toward the back of the switch (see
on page 278).
2 Use six of the provided screws to secure the bracket to the switch housing.
3 Repeat these steps to attach the other bracket to the other side of the switch.
Figure 257: Attaching a Rack-mounting Bracket (X670 shown)
4 Slide the switch into the equipment rack.
Figure 258: Installing the Summit X670 or X770 Series Switch
Summit Family Hardware Installation Guide
Figure 257: Attaching a Rack-mounting Bracket (X670 shown)
Installing Summit Family Switches
278